AEG Hob Ignition Faults
If one burner will not spark, check its electrode for cracks and grease. If none spark, the spark generator has failed. If sparking continues after lighting, a knob switch is stuck or wet.
AEG Gas Hob Repair in Dubai
Independent specialists for AEG built-in gas hobs, gas-on-glass hobs and wok burners.
AEG Specialists
Same-Day Home Visits
Quote Before Repair
Book a Technician Visit
Fill out this form and our technician will reach you within 30 minutes.
AEG gas hobs are premium built-in hobs, often installed in villas with AEG ovens. We repair ignition, flame failure devices and valves, then test all connections for leaks.
Gas-on-Glass Hobs
Glass-top gas hobs need the glass intact to be safe. We replace cracked tops and reseal the burners.
AEG Wok Burners and Pan Supports
AEG hobs often include a multi-crown wok burner. Heavy woks and cast-iron pan supports take a lot of punishment, and a pan support that does not sit flat can deflect the flame onto the knobs and scorch them. We check the burner crowns, pan supports and knob area as part of every AEG hob service.
How We Repair an AEG Gas Hob, Step by Step
Our AEG process:
- 1Supply valve and connections are checked.
- 2Each burner is lit, including the wok burner.
- 3Electrodes, switches and thermocouples are tested.
- 4Burner crowns and pan supports are realigned.
- 5All connections are leak-tested.
AEG Gas Hob Safety Features
AEG gas hobs have a flame failure device on each burner: a thermocouple that closes the gas if the flame goes out. It is an important safety feature and must never be bypassed. If a burner will not stay lit, hold the knob for 10–15 seconds after lighting. If it still goes out, the thermocouple or the magnet in the valve needs replacing.
Frequently Asked Questions
Why does my AEG hob keep clicking?
Usually moisture in a knob switch. If drying does not help, we replace the switch.
Why are the knobs on my AEG hob getting hot?
The flame may be deflected by a misaligned burner crown or pan support. We realign or replace the parts.
Do you repair AEG induction hobs?
We focus on gas hobs. Ask us about your specific model.
Why must I hold the AEG knob in when lighting?
It gives the thermocouple time to heat and hold the gas valve open.
How long does an AEG gas hob repair take?
Most ignition and thermocouple repairs take under an hour, including leak testing.
Are you the official AEG service center?
No. We are an independent repair company specializing in AEG appliances. If your AEG gas stove is under manufacturer warranty, contact the official AEG service center first. For out-of-warranty repairs, we offer same-day visits across Dubai.
Ready to Book Your Repair?
Book a technician today. Same-day visits across Dubai, with an itemized quote before any work starts.